Star Trails, old and new ways

Star Trails, old and new ways

On those clear starry nights when I am out searching for the aurora borealis, but no lights come out to play, I like to make sure that the effort of being out late and freezing my tuchus off is still worthwhile.  One way to do this is to highlight the magic of those starry skies through a star trails capture.

Up until about 2009, the only way I had ever considered capturing star trails was with a single, multi-hour exposure.  The technical aspects of capturing such a photo are fairly simple.  Set the ISO of your digital single-lens reflex (DSLR) camera to 100, white balance to auto, exposure to manual on the “bulb” setting, and the f-stop to f/2.8.  Turn off the auto focus on your camera and set the manual focus to Infinity.  Do not turn your focus ring all the way over to the end where the Infinity symbol is, that is not a true Infinity.  It will take a couple of test shots, zooming in on the stars following each capture, to determine where the true Infinity focus point is.  Finally, you will need a shutter cable release that allows you to lock the shutter open.  Once you have everything set up and have isolated the composition you desire, push the button on that shutter cable release and lock it in that position.  Then, go find something to do for a couple of hours.  With DSLR cameras, you will likely not want to set an exposure for longer than three hours or so, as the noise build-up in the image after such a long exposure will not be fixable.  This is one advantage film still has over digital – you can create a four-hour star trail photo with no image quality degradation.

The other critical element for capturing a single-image star trails exposure is the phase of the moon.  Anything brighter than a quarter moon will overexpose the landscape when exposed for two or more hours.  You cannot compensate by adjusting your f-stop to something higher, like f/8.0 or f/11, as that will take away the much needed exposure of the stars.  But, that is not to say that it is impossible to create a star trails image under a bright moon.  I have created star trails images on full or nearly-full moon nights before.

The key is to capture several images and then merge them into one using Photoshop.  You will need to have a camera with a built-in Intervalometer, like those available in Nikon cameras starting with the Nikon D300, or you will need to purchase one to attach to your camera.  The Intervalometer is what allows you to set your camera to take pictures at regular intervals, the key technical requirement of creating a star trails image using several images.

On a recent nearly-full moonlit night, I captured 1,000 images over a one-and-a-half hour period.  I set my exposure manually to 4 seconds and ISO to 1600 (applying all of the other settings mentioned previously), and set my Intervalometer to take a photo every 5 seconds for 999 photo captures.  It is key to make sure that there is as little gap as possible in between exposures in order to minimize or eliminate gaps in star trails that may occur as a result of star movement in between exposures.

Once you have captured your 1,000 or so images, now you need to bring them all together.  In order to make the files manageable in size, I typically will not shoot these files in RAW mode (with my Nikon D800, each RAW file is 25 megs – things add up after a while).  Place all of your star files in a folder that will be easy to locate and isolate.  Next, search the Internet to find a usable action that you can download and incorporate into Photoshop.  (Photoshop does not have any built-in feature that can do what needs to be done; you cannot simply stack the images in layers and easily merge them into a single layer.)  One action I used recently is the Star Circle Academy Stacker. I found the instructions relatively easy to follow and the Action is free – a teaser to sign up for some of their nighttime photography courses.  I used a similar action three years ago when creating a star trail photo during a full moon in Badlands National Park while spending time there as the park’s Artist-in-Residence.  In that case, I had set my camera to take photos all night in order to create a time lapse.  This presents another advantage of setting up a star trails photo using this method – the images captured can also have other applications.

Finally, there is actually a star trails feature built into Photoshop CS5.  I prefer not to use this method because it really is cheating.  It also requires you to separately capture a blank star field, with no landscape, and whatever foreground landscape you want to have in the image.  To create the star trails using this method, open up your RAW star field file in Adobe Bridge, adjusting the Clarity to bring out the whites of the stars.  Once the file is open, select your Actions feature in Photoshop CS5, then click the fly out menu on the upper right portion of the Actions tab.  Toward the bottom you will see “Star Trails Rotation.”  Select that and then hit the Play button on the bottom of the Actions window to see the rotations created.  You can repeat this function several times in order to lengthen the star trails.  You will note, however, that the more you do it, the more fake the image becomes.  Once you have created this star trails image, you can place it in the background of your foreground landscape.  Again, I do not use this method because it is not only cheating, but does not produce as visually stunning of a result as a single exposure or a thousand-image star trail photo.

The nighttime is a wonderful time to be out in the winter, especially on a cold, clear night.  Just because the aurora has not come out as you hoped does not mean you have to go home empty-handed.

 

One Response to “Star Trails, old and new ways”

  1. Carl Johnson Photography - Blog Says:

    […] at f/2.8 and shutter speed at 8 seconds. Then I adjust to how bright or active the aurora is. For star trails photography, ISO 100 in manual mode on the bulb setting with the aperture set at f/2.8 and the […]

Leave a Reply